USB Printing for Meghdoot Millennium

Meghdoot Millennium Applications/Software’s Support USB Printing. Most of us are not aware of this . Some of the servers available with Post offices only support usb printing. They does not have LPT1 or COM Ports.Yesterday in one of my office solved this USB printing problem with a simple tweak.

For USB Printing

To enbale USB Printing for Meghdoot Applications. First Install the printer with usb port. We can select the port by arrow keys while installing. Or we can configure the port after installation of printer in LPT.

How to configure PB Printer to work through USB Cable ?

How to configure PB Printer  to work through USB Cable ?

HOLD BOTH STATION1 and STATION2 BUTTONS IN THE PRINTER

Switch on the printer

Leave the Buttons

Insert the paper into the printer

Automatically Printer will take the paper inside and a message will be printed as follows

STATION 1-CONFIRM      STATION 2=SKIP    PRESS LOCAL TO CONTINUE

Press LOCAL and then STATION 1

The Default Configuration will be printed as follows

MENU          :                            CONFIG       Press STATION 1

DRAFT SPEED:               NORMAL      Press STATION 1

LQ TYPE:                        NLQ1           Press STATION 1

PAPER WIDTH:                FIRST LINE  Press STATION 1

BUZZER:                        Y                 Press STATION 1

INTERFACE                     By default SERIAL or COM1 will be there Press STATION2

Till USB is printed and then Press STATION 1

USB EMULATION            By default OLIVETTI will be there Press STATION2

                                         Till IBM is printed and then Press STATION 1

Increase the printing speed of your printer

 

You can improve the printing speed of your printer with managing the print spooler option. Basically printer spooler holds your prints for some time then send to printer for print out. By default on most printers, printer spooler option is enabled but you turn off to specify that the file should be sending to the printer and not spooled. 

Here printer spooler option might be different location in your printer but on most printers you can turn off by going to Start, Setting then Printers. Now right click on the icon of the printer that you are using. Click Properties and select the Advanced tab. Here click on “Print directly to printer” option.

Convert Any Web Page or Document to PDF- Freely

1. 
   To get started, first follow the link below and download Free Pdf Printer then install it to your computer.
2. Once you're done, you might need to close the program (or the web browser) which you're currently viewing the document. This helps refreshing the list of available printers on your computer.
3. Once you get back to the document you want to convert, perform the same steps are you print out the document, i.e. File > Print ...
4. When you see the Print window pop-up, select "Bullzip PDF Printer" under "Printers", then click "OK".

HP LASER JET P 1007 PROBLEM-Printing reports from Treasury Module

If you find any problem while printing reports from treasury module to printers such as HP LASERJET P1007 which have only the usb port,use the attached software. Install and start the software. Add one printer to the LPT port (even if there is none physically). While printing the reports, select this printer. Then printout will be from the usb printer.

Click here to download the software

source sysadminmji4 manjeri 

OLIVETTY PASSBOOK PRINTER CALIBRATION

 

 If your olivetty passbook printeris not working, test the following method of calibration.

How to calibrate Olivetti PR2/PR2E Passbook Printer

Olivetti passbook printers are widely used printer in post offices. Sometimes we find problem with printer when it stops printing. In that case, calibrating the printer can solve your problem. Follow the steps to calibrate Olivetti PR2/PR2E passbook printer: